Page 6 of 9

Posted: 12.08.2018, 20:58
by Seifer1968
Thanks, maybe the trailers...
I try with an original trailer.

Posted: 12.08.2018, 22:01
by Seifer1968
Sorry for double post...
Yes, I solved, a mod caused conflict...

Posted: 29.09.2018, 17:53
by willy1962
after the update to 1.32 Ievery time my game crash in ETS2

00:11:56.726 : <ERROR> f:\build_bot\ssd_win_slave\final_build_ets2_132_windows_bin_steam_x64\build\prism\src\p3core\collections/arrays/arrays_base_impl.h(453): ??A?$array_t@Ur_buffer_segment_t@prism@@@prism@@QEAAAEAUr_buffer_segment_t@1@_K@Z: Index outside array boundaries.

I`m searching and testing for 14 our now I hope someone can help me.

Does the crash comes from the RTA Kenworth K108 ?

I have NO mapmods and NO trailermods and NO other truckmods
I`ve taken all the mods out.

with ATS I have the RTA Kenworth K200 and no problems ??? !!!

Posted: 29.09.2018, 20:44
by willy1962
willy1962 wrote:after the update to 1.32 Ievery time my game crash in ETS2

00:11:56.726 : <ERROR> f:\build_bot\ssd_win_slave\final_build_ets2_132_windows_bin_steam_x64\build\prism\src\p3core\collections/arrays/arrays_base_impl.h(453): ??A?$array_t@Ur_buffer_segment_t@prism@@@prism@@QEAAAEAUr_buffer_segment_t@1@_K@Z: Index outside array boundaries.

00:14:58.030 : <WARNING> Too many nodes on a physics cable.
00:14:58.047 : <WARNING> Too many nodes on a physics cable.
00:14:58.064 : <WARNING> Too many nodes on a physics cable.

I`m searching and testing for 14 our now I hope someone can help me.

Does the crash comes from the RTA Kenworth K108 ?
I`ve download it again and install now I`m testing .

I have NO mapmods and NO trailermods and NO other truckmods
I`ve taken all the mods out.

with ATS I have the RTA Kenworth K200 and no problems ??? !!!

Posted: 29.09.2018, 20:49
by Admin-RTA
hello
send a game log please

Posted: 04.10.2018, 12:27
by willy1962
I have now the same problem in ATS as in ETS2.
and it starts when you start buying owned trailers !
due problems with pastebin I send log to Oleg by mail.
I understand you are very busy with the updates but my advise take a look at the trucks in combination with owned trailers.
in ETS2 I drive now an SCS Volvo the same mods and errors or crashes.
when buying the truck did not change interior.
► Show Spoiler

Posted: 04.10.2018, 20:08
by Admin-RTA
I checked k200 and did not find any errors
probably you have a mod conflict
send me your game log

example_game log.jpg

ATS
ats_20181004_200523_00.png
► Show Spoiler

ETS2
ets2_20181004_201635_00.png

Posted: 05.10.2018, 10:49
by willy1962
Many thanks for sofar.
I send 2 mails with 3 game.log
- ATS game.log K200
-ETS2 game.log K108
-ETS2 game.log SCSVolvo
and some pics that happens in both games.

Added after 56 minutes 26 seconds:
In ETS2 I`ve been searching and testing for 14 ours and don`t find a solution.

today I found this :https://forum.scssoft.com/viewtopic.php?f=32&t=250965&p=996020#p996020
and it looks good, need further testing more KM / Miles.

4800 3.3 error

Posted: 07.10.2018, 09:21
by speedy210380
getting this error for the 4800 3.3 only truck actived new profile and crashes the game completely, any help would be awesome

ERROR> [unit] There are multiple unit trees in the file '<D:/American Truck Sim/American Truck Simulator/mod/ATS_RTA-Mods_WS4800_v3.3_part2.scs | >/def/vehicle/truck_desktop/ws4800.sii'.
00:00:59.866 : <ERROR> load_unit_tree() - Failed to load unit tree from file (/def/vehicle/truck_desktop/ws4800.sii)

Posted: 07.10.2018, 13:05
by Admin-RTA
Hello
install above part2 in mods manager
ws4800_truck_desktop.scs

Posted: 06.11.2018, 11:56
by Luc1979
Seifer1968 wrote:Sorry for double post...
Yes, I solved, a mod caused conflict...

I had the same problem, but it seems not a mod conflict. it is just a small spot for trailer coupling activation in advanced modr for Pete359.

Regards

L

Posted: 21.11.2018, 19:04
by The Dude
When someone ask for the game.log.txt, which in your Documents/American Truck Simulator, open the game.log.txt in note pad copy all of the log and use pastebin to create a paste of the log then post the link to the log. https://pastebin.com/index it's free.

Posted: 25.12.2018, 21:56
by Cabby
Hello everyone


Have anyone had some trouble with the truck WS 4800 and then that gauges are all black ?

I also have K108 and Superlinern but no probs there.....

kindly regards
Sture

Image

Posted: 25.12.2018, 21:58
by Admin-RTA
should be so
ats_20181225_210314_00.png


game log send please
example_game log.jpg

Kenworth t609

Posted: 04.03.2019, 05:30
by Coolhand 112
Hello I wanted to ask if one of you plays with the RTA-Mod Kenworth T 609.
For me it comes after I have brought one or two loads away, in addition to the load times from the menu, for example, if I give freight or the truck upgrade would extremely slow down.between each click

Posted: 04.03.2019, 05:40
by Admin-RTA
Hello
If you started the truck for the first time, all files are shipped to the game. After downloading all the files, your FPS will be good.
Just run the game several times and see the difference. :wink:

re kenworth t609

Posted: 04.03.2019, 07:30
by Coolhand 112
so i testedt it and it is se same i have some screen shots from mod list and in the shop with open console

mod list
Image

in shop with console
Image

Added after 1 minute 34 seconds:
[quote="Coolhand 112"]so i testedt it and it is se same i have some screen shots from mod list and in the shop with open console

mod list
Image

in shop with console
Image

Posted: 04.03.2019, 08:06
by room217au
Coolhand 112 wrote:Hello I wanted to ask if one of you plays with the RTA-Mod Kenworth T 609.
For me it comes after I have brought one or two loads away, in addition to the load times from the menu, for example, if I give freight or the truck upgrade would extremely slow down.between each click
The warnings you have in game.log are happening because SCS only allows 22Mb per resource (ie. model)
KW T609 has models (truck.pmg, t609_int_exterior.pmg. etc) that are all bigger than 22Mb.
This is okay for the game to load, but it means that it must load more "22Mb blocks" of RAM to fit all of the model into game.
It does this every time you upgrade the truck and/or everytime you take or drop off a load.

To prevent these warnings from appearing, and also increase FPS, do this:
1. Right-click on game in Steam Library (ETS2 or ATS) and select "Properties"
2. In the box that pops up, click "Set Launch Options.."
3. Another box will pop-up and in that box, copy 'n' paste this:
-mm_max_resource_size 80 -mm_max_tmp_buffers_size 960
4. Click Okay.

If there is already commands present in the Set Launch Options box, leave a space after them, then paste the above commands.


What this does is increase the resource size available for loading of models to 80Mb each. The 960 means the game now allocates 11 buffers for loading instead of 5.
This also includes loading of map resources. So essentially the game should load faster. Using this same process and driving the T908, I noticed a gain of at least 15fps on the highways and 10fps in town.
Even so, after about an hour's driving (real time) I noticed that the game slows down. The huge PMG files that RTA produce makes the game work very very hard indeed, especially on mid to low-range machines.
They are reducing the size of their models, but that does take time.

Posted: 04.03.2019, 17:25
by Admin-RTA
T908 has 5 or 6 parts that will be removed in the next update. Such as tanks and wings ... These are old models that have a lot of polygons and their weight is very large. We already removed them, but people asked to return these parts and we added them in the game version 1.28

Posted: 05.03.2019, 03:16
by room217au
Admin-RTA wrote:T908 has 5 or 6 parts that will be removed in the next update. Such as tanks and wings ... These are old models that have a lot of polygons and their weight is very large. We already removed them, but people asked to return these parts and we added them in the game version 1.28

Thanks, but the accessories are not the issue.
These files are the ones that need to be reduced, especially the interior model(s):

ATS Kenworth T908 version 6.4 released December 2018:
part2\vehicle\truck\ken908\interior\model.pmg = 73Mb
part2\vehicle\truck\ken908\truck.pmg = 37Mb
part2\vehicle\truck\upgrade\t908_ext_interior\t908\t908_ext_interior.pmg = 56Mb

ETS2 Kenworth T908 version 6.4 released December 2018:
part2\vehicle\truck\ken908\interior\model.pmg = 55Mb
part2\vehicle\truck\ken908\truck.pmg = 38Mb
part2\vehicle\truck\upgrade\t908_ext_interior\t908\t908_ext_interior.pmg = 56Mb
part2\vehicle\truck\upgrade\t609_ext_interior\t609_ext_interior.pmg = 46Mb

Surely these models can be significantly reduced in polygon count without affecting quality.