If anyone's got a genuine old school 24sp trans .. lemme know :)

Bonjour, avec cette dernière version du T, j'ai un problème que je ne peux résoudre. Je joue en DX11, avec seulement ce mod camion, et je n'arrive pas à regler correctement le rétroviseur de droite. De plus, quand je passe sur le siège passager, le coté droit visible du camion est "détaché" du camion....

Hello.
I purchased peterbilt 359 LHD 2.2.1 truck to ATS! 2019.07.12.
Transaction ID: 6TX8453838615043T

The game is CTD!

Game log:

00:00:58.159 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/interior_decors/toyglass/gps.dlc_toys.pmd' in the read_only mode.
00:00:58.159 : <ERROR> [ld] Failed to open '/vehicle/truck/upgrade/interior_decors/toyglass/gps.dlc_toys.pmd'.
00:00:58.159 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/interior_decors/toystand/pearphone.dlc_toys.pmd' in the read_only mode.
00:00:58.159 : <ERROR> [ld] Failed to open '/vehicle/truck/upgrade/interior_decors/toystand/pearphone.dlc_toys.pmd'.
00:00:58.162 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/interior_decors/toyglass/gps.dlc_toys.pmd' in the read_only mode.
00:00:58.162 : <ERROR> [ld] Failed to open '/vehicle/truck/upgrade/interior_decors/toyglass/gps.dlc_toys.pmd'.
00:00:58.162 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/interior_decors/toystand/pearphone.dlc_toys.pmd' in the read_only mode.
00:00:58.162 : <ERROR> [ld] Failed to open '/vehicle/truck/upgrade/interior_decors/toystand/pearphone.dlc_toys.pmd'.

Run DX9 DX11
New clean profile and no other mods but crash!

Thx the help.

Is anyone else have the k200 and 359 maxing out their GPU cause these two are and im running a 1080ti and i cant figure out why

Frankiee wrote:The game is CTD!
00:00:58.159 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/interior_decors/toyglass/gps.dlc_toys.pmd' in the read_only mode.

Have you also added Cabin Accessories mod? You should get that file with every ATS truck you purchsae from RTA.
You need to give the Cab Acc mod higher priority than the trucks.

Hi,

I have problem with interior camera in KW T908. Doesn`t work. :-(
How I can go to bed? It is possible?

Please help me :-)

Astonishing course of expression. Keep it up!

Hey guys, have disabled all workshop mods and started a fresh install (removed old mod folder too)
Whenever i finish customizing an RTA truck and go to purchase my game seems to crash , also my RTA files are all 1.35 and i am playing on 1.37 and when rolling back to 1.35 i still have the same issue, also both the 1.35/1.37 versions the exhaust sounds are super quiet and buggy or not there at all.

Here is my crash log

CRASH 1 :::::

Crash log created on: Mon Apr 27 16:07:20 2020
Build: 1.37.0.146s 893908b89e1e
OS: x86_64 / Windows 10 x64 (version 10.0)
CPU: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz at 4200000
MEM: Phys:16341 Virt:134217727
GPU: <unknown> Mem:0 Ver: 0

AvailMEM Virt:134207970 Phys:7077 Total:11029
TotalMEM Virt:134217727 Phys:16341 Total:27093
Exception code: C0000025 NONCONTINUABLE_EXCEPTION
EXE Base address: 00007FF75A930000
Fault address: 00007FF8C60FA799 0001:00039799 C:\WINDOWS\System32\KERNELBASE.dll

Registers:
RAX:00000000000000FC
RBX:00007FF75B9EEC60
RCX:00000000000000FC
RDX:00007FF75B823C4A
RSI:00007FF75B9ED720
RDI:00000000000001EB
R8:00007FF75B8239E1
R9:000000B24BF1E930
R10:000000B24BF1E958
R11:00000000FFFFFF04
R12:000002487CC2D3C8
R13:000000B24BF1F950
R14:0000000000000000
R15:0000000000000001
CS:RIP: 0033:00007FF8C60FA799
SS:RSP: 002B:000000B24BF1EF60 RBP:00007FF75B952C40
DS:002B ES:002B FS:0053 GS:002B
Flags: 00000202
RIP preamble: 89 4C 24 20 89 54 24 24 48 89 44 24 30 4D 85 C9
74 4B B8 0F 00 00 00 48 8D 4C 24 40 44 3B C0 49
8B D1 44 0F 47 C0 44 89 44 24 38 49 C1 E0 03 E8
DA 4E 05 00 48 8D 4C 24 20 48 FF 15 8F C4 16 00
RIP bytecode: 0F 1F 44 00 00 48 8B 8C 24 C0 00 00 00 48 33 CC
E8 72 EF 04 00 48 81 C4 D8 00 00 00 C3 83 64 24
38 00 EB D0 CC CC CC CC CC CC CC 48 89 5C 24 08
48 89 74 24 10 57 48 83 EC 20 8B DA 48 8B F9 E8

CRASH 2::::


Crash log created on: Mon Apr 27 17:45:32 2020
Build: 1.37.0.146s 893908b89e1e
OS: x86_64 / Windows 10 x64 (version 10.0)
CPU: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz at 4200000
MEM: Phys:16341 Virt:134217727
GPU: <unknown> Mem:0 Ver: 0

AvailMEM Virt:134207176 Phys:7406 Total:10664
TotalMEM Virt:134217727 Phys:16341 Total:27093
Exception code: C0000025 NONCONTINUABLE_EXCEPTION
EXE Base address: 00007FF7B92F0000
Fault address: 00007FF8C60FA799 0001:00039799 C:\WINDOWS\System32\KERNELBASE.dll

Registers:
RAX:00000000000000FC
RBX:00007FF7BA3AEC60
RCX:00000000000000FC
RDX:00007FF7BA1E3C4A
RSI:00007FF7BA3AD720
RDI:00000000000001EB
R8:00007FF7BA1E39E1
R9:000000227FD1E730
R10:000000227FD1E758
R11:00000000FFFFFF04
R12:0000015607402138
R13:000000227FD1F750
R14:0000000000000000
R15:0000000000000001
CS:RIP: 0033:00007FF8C60FA799
SS:RSP: 002B:000000227FD1ED60 RBP:00007FF7BA312C40
DS:002B ES:002B FS:0053 GS:002B
Flags: 00000202
RIP preamble: 89 4C 24 20 89 54 24 24 48 89 44 24 30 4D 85 C9
74 4B B8 0F 00 00 00 48 8D 4C 24 40 44 3B C0 49
8B D1 44 0F 47 C0 44 89 44 24 38 49 C1 E0 03 E8
DA 4E 05 00 48 8D 4C 24 20 48 FF 15 8F C4 16 00
RIP bytecode: 0F 1F 44 00 00 48 8B 8C 24 C0 00 00 00 48 33 CC
E8 72 EF 04 00 48 81 C4 D8 00 00 00 C3 83 64 24
38 00 EB D0 CC CC CC CC CC CC CC 48 89 5C 24 08
48 89 74 24 10 57 48 83 EC 20 8B DA 48 8B F9 E8

any help appreciated

AidanTrucking, Hello
Please send a game log and I will see what the problem is

AidanTrucking wrote:Hey guys, have disabled all workshop mods and started a fresh install (removed old mod folder too)
Whenever i finish customizing an RTA truck and go to purchase my game seems to crash , also my RTA files are all 1.35 and i am playing on 1.37 and when rolling back to 1.35 i still have the same issue, also both the 1.35/1.37 versions the exhaust sounds are super quiet and buggy or not there at all.

None of the trucks from game version 1.35 will work on 1.37
More'n likely crash the game. It's not just sound changes in 1.37, there are a number of things that changed in def and ui files.
RTA always used Kriechbaum sounds, even in 1.36, and all of those sounds worked correctly in 1.35/1.36

The only way you can be absolutely sure it's not a mod confilct:
1. move your ATS Documents folder (completely) to another location
2. In Steam Launch options, add "-noworkshop" (without the quotes). This prevents Workshop mods from even being mounted.
3. Start the game, it will create a new Docs folder. Quit.
4. Drop your RTA trucks into your mod folder. If one doesn't exist, create it.

99.99% I say your game won't crash.

Hi Guys

Occasionally, i find i'm dropping all air from my K200 and T908 and having to stop completely to allow it to build again, only to have it happen again. Not much fun at 55mph :)
I've checked all settings, but haven't found anything wrong. Is there a fix for this, as it happens a lot?

Cheers

Mariesman wrote:I've checked all settings, but haven't found anything wrong. Is there a fix for this, as it happens a lot?

You could try turning off "Air Brakes Simulation" in gameplay options

Practice using the engine brake or retarder or exhaust brake when slowing down.
Excessive use of foot brake will deplete the air tanks quickly.

Cheers mate. Got it sorted. Was a sticking pedal of all things.

Hi just got the updated 1.37 version of the kenworth t609 however ther is a problem it wont work as part 1 keeps showing up as t908.
have included 2 screenshots of the folders and you can see the naming.

huntz845, Hello
Strange mistake ... We fixed
Download files again

Admin-RTA,
Thanks heaps that has fixed the issue. thanks

Hi, the horn fix add-on is not working for me on the k108 on ETS2, it crashes the game when the mod is activated and selecting the k108. This is the only truck I have tried it on in the game.

Here's my Game log.

https://pastebin.com/syJ5g8pD

Added after 54 minutes 49 seconds:

mgjsmith wrote:Hi, the horn fix add-on is not working for me on the k108 on ETS2, it crashes the game when the mod is activated and selecting the k108. This is the only truck I have tried it on in the game.

Here's my Game log.

https://pastebin.com/syJ5g8pD

I just tried the k200 with the horn in ETS2 and working fine but crashes the game with the k108

mgjsmith, Hello. Fix k108 for ETS2

Thank you

There a strange issue with the Superliners weigh station device in ATS 1.38, it's reverted somehow, so when it's supposed to light up red, it lights up green and vice versa.