Page 4 of 5

Posted: 08.09.2018, 16:00
by Wulfkai
Hi, first of all thx for a truly awesome truck! really a favorite i've been waiting on, i did however find some flaws i would like to share:

What is the proper load order for part 1.2.3?

Speedometer is off by 2-4 MPH, testet in cruise with "F5" infoscreen enabled

I seem to have a pinkish glow in the cabin, especially visible when looking at the car in the dealershop or upgrade garage.

The pyrometer does not seem to work? mine is constantly on zero?

again thx for a wonderfull truck

and regarding advanced coupling, what the administrator mentioned as the easy way with the 2-3 meters worked for me

would it be possible to add the cummins 444 from kriech in a future update?


best regards

Posted: 08.01.2019, 23:46
by The Dude
Just wanted to share the only two issues I've come across so far. The clock not working and the fuel gauge not reading right, this is version 2.0.


Imageats_20190108_151948_00 by GARY ALLEN, on Flickr

Posted: 21.01.2019, 07:56
by einjzmolf
Thanks for this mod. Always wanted it but the lack of sleeper options made me hold off. The 36" sleeper compliments the truck perfectly and I'm anticipating the 60" sleeper more and more every day! This truck really does send you back in time.

I really think this truck would flourish if RTA went in a more "custom friendly" route with it, compared to the more stock style associated with their mods. With Viper2 dropping support of the 389 mod, people are looking for a truck to fill the void of "new and fresh"

There's a very solid base here that people enjoy - if you ask me, the best possible starting point for the newest "super mod"

Something as simple as an accessory pack update for this truck would make big waves in the trucksim community

Things like -
1) Longer chassis, along with lowered options

2)Sleeper options such as Mercury and Eagle sleepers, to go along with the standard 36" and 60" options

3)Lights! I'd love the option to not have the side marker lights at all for a retro look, along with different styles/amounts of lights (round 70s style lights, boxy 80s style lights, modern styles too)

4)Bumpers and Exhaust Stacks, the options we have right now are FANTASTIC, 10/10 - I just hope for more variation of this quality in the future.

So in conclusion, it's the perfect truck! I just hope to see even more love and time put into it, which seems to be the case. Glad to have purchased :)

Posted: 23.01.2019, 05:06
by Admin-RTA
The Dude wrote:The Dude
Hello
Thank you for your message. We have fixed the clock and in version 2.1 everything will work :wink:
ats_20190123_035049_00.png
► Show Spoiler

ats_20190122_232227_00.png
► Show Spoiler

Posted: 25.01.2019, 17:17
by irhejja
Hi all,

I agree with einjzmolf:

1. Additional sleeper options, like the 60 inch and Mercury sleeper.
2. Bumpers, exhausts, lights, etc. lots of chrome :smile:
3. CAT 3408 V8 engine ( I read it was a quite popular choice).
4. Maybe some headache/logging racks?

Some cool info and pics here:

https://www.smart-trucking.com/359-peterbilt.html/

:class:

Posted: 27.01.2019, 19:40
by Cabby
Hi all

What i can miss is some kind of a wildbar with the option to put on extra lights.

(the 359 will be my 5th RTA model and i just love them all - keep up the good work :class:

Posted: 27.01.2019, 19:43
by Admin-RTA
Hello
You are not mistaken with 359 ETS?
You have all the ATS trucks and I decided to find out if there is an error?

Posted: 27.01.2019, 19:50
by Cabby
yeah saw my mistake,i bought for ETS when i wanted it to be ATS....my bad :zombie:

SISL's mega pack not working

Posted: 27.01.2019, 22:00
by deuszek
I don't know why but SISL's pack stop working in Pet 359 :( I try some combinations and without success. Anyone have problem with it? I can't even put any GPS :/

Added after 29 minutes 50 seconds:
deuszek wrote:I don't know why but SISL's pack stop working in Pet 359 :( I try some combinations and without success. Anyone have problem with it? I can't even put any GPS :/

I'm so stupid! Everything working, I forgot to add accesories for this truck to mod list :zombie:

Posted: 02.02.2019, 11:07
by truccboi_
I've been doing my fair share of research on the 359, there were three hood options, 113.5 bbc, 110.5 bbc, and the 127.5 bbc, the 127" hood being for detroit 12v71 and Cummins KT models
I'd like to see a wider variety of older cummins like small cams and big cams like the small cam 290, or the big cam 350

Ver. 2.1 Template spots

Posted: 16.02.2019, 21:55
by Thorrus
Hi guys

I'm looking for these spots on template. These little lights holders should be black as rest of fender. I can't find them. Thanks.

RTA_359_TemplateSpot1.png


P.S. One of the best truck for ATS. My favorite. Ver. 2.1 works great without errors. :clap:

Posted: 02.03.2019, 21:25
by Ghostrider2800
Hey guys,

now that you finally added a sleeper i decided to buy this bad Boy. And what should i say ist great. Thanks for this awesome mod. :clap: After my first tour i found a few bugs.

1. The speedo indicates only in low speed correctly. In high speed its not correct. (At 55mph it shows 53mph and at 65mph it shows only 62mph)

2. The weight station device doesnt work as it should. I hear it peep but the red and green light dont work!

3. When i use the high beam lights there is no blue light in the dashboard which tells me that i activated the high beams.

4. I dont know if this is a bug or its because this mod is still a WIP but there are no switch animations in the dashboard. The only switch which is animated is the lights switch. The lever for the trailer brake doesnt work. There is no animated switch for the wipers and i miss an animation for the engine brake.

5. The engine brake (NOT the retarder!!!!!) has almost no effect. Pls make the engine brake much stronger because in high gears it has Close to no brake power.

So this are all issues which i noticed so far and now i would like to give you some suggestion/wishes.

1. A longer chasis with a 60" sleeper would be awesome like you showed in your pics when the mod was in early stage of development.

2. An original 318hp 8V-71 engine. :pray:

3. Im missing urgently 13 speed transmissions. :pray:

4. When i look at the rear Fender options there are paited and chrome options for the quarter and full fenders BUT if you want to choose the half Fenders there is only a paited Option. PLS give us a chrome option for the half fenders too.

Added after 39 minutes 27 seconds:
i forgot one more thing. Advanced trailer coupling doesnt work also.

Added after 49 minutes 2 seconds:
There is no animated switch for the div. lock and no indication light on the dashboard.

Added after 23 minutes 42 seconds:
The fuel quantity is way to big with 634 gallons. Seems like an Australian configuration. Pls reduce to 300 gallans this should be realistic.

Posted: 13.05.2019, 20:47
by irhejja
Please add the option to select white mud flaps in front and back as well. Since the last update I only have the black option in the front :)

Posted: 18.05.2019, 21:14
by irhejja
irhejja wrote:Please add the option to select white mud flaps in front and back as well. Since the last update I only have the black option in the front :)

This is what I am thinking about.

Posted: 14.06.2019, 00:37
by The Dude
Getting vertex errors with v2.2 in ATS 1.35.1 and this happens randomly.

Imageats_20190610_130206_00 by GARY ALLEN, on Flickr

Posted: 16.06.2019, 12:52
by MyNamesJebb
We really need this skin, I know it may be silly, but this truck is so iconic.

Added after 1 minute 32 seconds:
MyNamesJebb wrote:We really need this skin, I know it may be silly, but this truck is so iconic.



TBH, looks to be more of a KW 351, the old 359 would do great however!

Posted: 20.06.2019, 19:40
by irhejja
irhejja wrote:
irhejja wrote:Please add the option to select white mud flaps in front and back as well. Since the last update I only have the black option in the front :)

This is what I am thinking about.

Can anyone confirm this? I'm sure it used to be selectable, I remember having a red Peterbilt 359 with white mudflaps... am I missing something?

Posted: 21.06.2019, 04:22
by trucker-rob
irhejja wrote:
irhejja wrote:
This is what I am thinking about.

Can anyone confirm this? I'm sure it used to be selectable, I remember having a red Peterbilt 359 with white mudflaps... am I missing something?

hi ive experienced this phenomenon for a fair while myself and as such have to compensate with a black paint job.

Posted: 09.07.2019, 15:42
by irhejja
trucker-rob wrote:hi ive experienced this phenomenon for a fair while myself and as such have to compensate with a black paint job.

I really hope they will add the option to select on all the mudflaps in the next update on all the fender variations... right now all the truck configurations I would like have different colors in the front/middle/back :insane:

Posted: 10.07.2019, 07:54
by shadowcaster
Please add the option to have REX and TEKIR in the cab, I really miss not having them along side me
Cheers
Rich