If You do not receive an email after registering ,check your spam folder in Your mailbox .
Auto registration in the queue from 5 minutes to 12 hours
If you have problems logging on the forum, write your message in the technical support forum
Registration is not required
Technical support Forum
Auto registration in the queue from 5 minutes to 12 hours
If you have problems logging on the forum, write your message in the technical support forum
Registration is not required
Technical support Forum
Proposals-Wishes-bugs k 200
- Auzzie_Games
- VIP
- Posts: 32
- Joined: 22.01.2019
- Age: 22
- Reputation: 6 (+6/−0)
- Loyalty: 6 (+6/−0)
- With us: 5 years 11 months
- Location: campbelltown, NSW
- Flag: [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
- Geronimo_Express
- VIP
- Posts: 177
- Joined: 12.01.2017
- Age: 63
- Reputation: 245 (+245/−0)
- Loyalty: 208 (+209/−1)
- With us: 8 years
- Location: Taree, Australia
- Flag:
- Contact:
Hi Tommo,
I can confirm this issue.
I hadn't noticed it before as the AiRoad paintwork that I have been doing for the K200 Flat Roof didn't have any text on the door, so the problem wasn't apparant. However, I have just tested this by putting the AiRoad logo onto the doors and it is in fact putting the passenger door image onto the drivers door and vice-versa. Looking more closely at the template I noticed that the drivers door has the small lower window cutout on it, which would normally be positioned on the passengers side door, so I suspect that the doors have accidentally ended up on the wrong sides of the cab on the template.
I have PM'd Michael regarding this along with the images below to confirm the issue, and I am sure he will be able to rectify the problem.
Cheers, and have a great weekend matey,
Ian
I can confirm this issue.
I hadn't noticed it before as the AiRoad paintwork that I have been doing for the K200 Flat Roof didn't have any text on the door, so the problem wasn't apparant. However, I have just tested this by putting the AiRoad logo onto the doors and it is in fact putting the passenger door image onto the drivers door and vice-versa. Looking more closely at the template I noticed that the drivers door has the small lower window cutout on it, which would normally be positioned on the passengers side door, so I suspect that the doors have accidentally ended up on the wrong sides of the cab on the template.
I have PM'd Michael regarding this along with the images below to confirm the issue, and I am sure he will be able to rectify the problem.
Cheers, and have a great weekend matey,
Ian
- MannyGSR
- Прохожий
- Posts: 1
- Joined: 24.08.2019
- Reputation: 0 (+0/−0)
- Loyalty: 0 (+0/−0)
- With us: 5 years 4 months
- Flag: [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
Hi, I've just installed the v15.0 version of K200, previous version was v14.2, I found two bugs : speedometer is in km/h and camera can't rotate camera in back cabin.
These are the files:
ATS_KW_K200_RTA-Mods_v15.0_Part1 --> ATS_KW_K200_RTA-Mods_v15.0_Part1.scs\vehicle\truck\k200\textures_int\dashboard.dds in km/h
ATS_KW_K200_RTA-Mods_v15.0_Part2
ATS_KW_K200_RTA-Mods_v15.0_Part3
k200_speed_km --> ATS_KW_K200_RTA-Mods_v15.0.7z\k200_speed_km.scs\vehicle\truck\k200\textures_int\dashboard.dds in km/h of course
These are the files:
ATS_KW_K200_RTA-Mods_v15.0_Part1 --> ATS_KW_K200_RTA-Mods_v15.0_Part1.scs\vehicle\truck\k200\textures_int\dashboard.dds in km/h
ATS_KW_K200_RTA-Mods_v15.0_Part2
ATS_KW_K200_RTA-Mods_v15.0_Part3
k200_speed_km --> ATS_KW_K200_RTA-Mods_v15.0.7z\k200_speed_km.scs\vehicle\truck\k200\textures_int\dashboard.dds in km/h of course
- Teddy_PL
- VIP
- Posts: 76
- Joined: 06.09.2017
- Age: 31
- Reputation: 9 (+9/−0)
- Loyalty: 32 (+32/−0)
- With us: 7 years 4 months
- Location: Capital PL
- Flag: [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
K200 15.1 for ETS2.
Good morning Good Evening,
I got the K200 15.1 update to ETS2 and would like to share my opinion.
Well, I really like the new flat cabin and 8x4 chassis, but I am struck by the fact that you cannot add a flasher to the cabin on the roof, I don't know if this function is temporarily off, as You mentioned, but I miss it.
Also, as in the case of several other trucks, you cannot attach (advanced semi-trailer option) to SCS semi-trailers, because the chassis is too high and as I approached such a semi-trailer, it was repelled and it was impossible to attach it to the example semi-trailer from the photo below.
I know that this option can be turned off and hooked up normally or use a zero camera to move a piece and put the truck, but I do not want to do it commonly.
I haven't found any other conspicuous mistakes yet.
I got the K200 15.1 update to ETS2 and would like to share my opinion.
Well, I really like the new flat cabin and 8x4 chassis, but I am struck by the fact that you cannot add a flasher to the cabin on the roof, I don't know if this function is temporarily off, as You mentioned, but I miss it.
Also, as in the case of several other trucks, you cannot attach (advanced semi-trailer option) to SCS semi-trailers, because the chassis is too high and as I approached such a semi-trailer, it was repelled and it was impossible to attach it to the example semi-trailer from the photo below.
I know that this option can be turned off and hooked up normally or use a zero camera to move a piece and put the truck, but I do not want to do it commonly.
I haven't found any other conspicuous mistakes yet.
- Alex D
- VIP
- Posts: 70
- Joined: 08.04.2016
- Reputation: 14 (+14/−0)
- Loyalty: 105 (+108/−3)
- With us: 8 years 9 months
- Location: Москва
- Flag: [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
всем привет. я вот не знаю я такое только имею или это общий недочет. как видите различия между этими скриншотами очень большое. на первом который без руля отсутствуют дворники, стрелки приборов, педали ну и вот такие вот дела. это чего так у меня что не так или не у меня помогите уважаемые разобраться. спасибо.
You do not have the required permissions to view the files attached to this post.
"Я сперва служу России, а потом уже себе" - вице канцлер России граф Бестужев.
- Teddy_PL
- VIP
- Posts: 76
- Joined: 06.09.2017
- Age: 31
- Reputation: 9 (+9/−0)
- Loyalty: 32 (+32/−0)
- With us: 7 years 4 months
- Location: Capital PL
- Flag: [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
K200 15.1 for ATS and ETS2.
I got the K200 15.1 upgrade to Ats yesterday and found some changes in the version for Ats and Ets2.
Well, in the version for Ats I noticed that on the dashboard at the speed indicator this smaller display shows how many kilometers/miles I drove this truck and although I change the information on the on-board computer (the one on the right), this smaller display shows how many kilometers/miles I drove.
However, in the Ets2 version, I noticed that this display as soon as I change the information on the on-board computer shows me some of the information from the on-board computer.
I don't know if this is the intended goal, but I think it shouldn't be like that.
Ats:
Ets2:
Well, in the version for Ats I noticed that on the dashboard at the speed indicator this smaller display shows how many kilometers/miles I drove this truck and although I change the information on the on-board computer (the one on the right), this smaller display shows how many kilometers/miles I drove.
However, in the Ets2 version, I noticed that this display as soon as I change the information on the on-board computer shows me some of the information from the on-board computer.
I don't know if this is the intended goal, but I think it shouldn't be like that.
Ats:
Ets2:
- 8V92
- VIP
- Posts: 17
- Joined: 14.06.2017
- Reputation: 4 (+4/−0)
- Loyalty: 30 (+30/−0)
- With us: 7 years 7 months
- Flag: [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
Wipers not correct
The rain is obscuring the vision, see where the rain has wiped clean! The center of drivers view is not clear, i know the windscreen is curved but is this modeled in the sim?
https://www.youtube.com/watch?v=MTjXgZv4pfo
https://www.youtube.com/watch?v=MTjXgZv4pfo
https://www.youtube.com/watch?v=MTjXgZv4pfo
https://www.youtube.com/watch?v=MTjXgZv4pfo
- speedy210380
- VIP
- Posts: 13
- Joined: 17.04.2018
- Reputation: 4 (+4/−0)
- Loyalty: 0 (+0/−0)
- With us: 6 years 8 months
- Flag: [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
Who is online
Users browsing this forum: 1 guest