Page 11 of 14
Posted: 26.09.2019, 19:48
by willy1962
Whats new in 15.1
Posted: 26.09.2019, 19:53
by Admin-RTA
TommoK200, Hello
Where did you get such a problem? Are you using any other mods? Disconnect all old versions and check again
Posted: 27.09.2019, 02:33
by Auzzie_Games
Yea, Im The Same the mapping dosen't seem to line up properly
Posted: 27.09.2019, 03:13
by Admin-RTA
Auzzie_Games,
you must use the template
for cab flat roof - uv_template_cab_flat.bmp
for cab 2.3 - uv_template_cab_2.3.bmp
for cab 2.8 - uv_template_cab_2.8.bmp
I think TommoK200 uses a template for cab 2.8
Posted: 27.09.2019, 21:52
by TommoK200
Not unless I've labelled them wrong, but I don't think so:
k200 skin by
Tom TruckSim, on Flickr
Posted: 28.09.2019, 06:38
by Geronimo_Express
Hi Tommo,
I can confirm this issue.
I hadn't noticed it before as the AiRoad paintwork that I have been doing for the K200 Flat Roof didn't have any text on the door, so the problem wasn't apparant. However, I have just tested this by putting the AiRoad logo onto the doors and it is in fact putting the passenger door image onto the drivers door and vice-versa. Looking more closely at the template I noticed that the drivers door has the small lower window cutout on it, which would normally be positioned on the passengers side door, so I suspect that the doors have accidentally ended up on the wrong sides of the cab on the template.
I have PM'd Michael regarding this along with the images below to confirm the issue, and I am sure he will be able to rectify the problem.
Cheers, and have a great weekend matey,
Ian
Posted: 28.09.2019, 10:38
by willy1962
another question.
can someone give the parts a name on the flat template.
like , fenders/Wings , tanks , mudflaps , bumpar.
its make it easy for the one (me) to paint some parts if you know where they are on the template.
Posted: 28.09.2019, 12:45
by Admin-RTA
Geronimo_Express, Already fixed!
willy1962, Look here
► Show Spoiler
example_template_k200_v15.1.jpg
Within 1 hour I will send the corrected version 15.1 in mega
Posted: 28.09.2019, 13:30
by MannyGSR
Hi, I've just installed the v15.0 version of K200, previous version was v14.2, I found two bugs
: speedometer is in km/h and camera can't rotate camera in back cabin.
These are the files:
ATS_KW_K200_RTA-Mods_v15.0_Part1 --> ATS_KW_K200_RTA-Mods_v15.0_Part1.scs\vehicle\truck\k200\textures_int\dashboard.dds in km/h
ATS_KW_K200_RTA-Mods_v15.0_Part2
ATS_KW_K200_RTA-Mods_v15.0_Part3
k200_speed_km --> ATS_KW_K200_RTA-Mods_v15.0.7z\k200_speed_km.scs\vehicle\truck\k200\textures_int\dashboard.dds in km/h of course
Posted: 28.09.2019, 13:38
by Admin-RTA
MannyGSR, Hello
Camera changed due to flat cab
k200_speed_miles.scs
Posted: 29.09.2019, 15:19
by willy1962
thanks Admin this is perfect info and a good help to keep next by the template.
K200 15.1 for ETS2.
Posted: 02.10.2019, 14:37
by Teddy_PL
Good morning Good Evening,
I got the K200 15.1 update to ETS2 and would like to share my opinion.
Well, I really like the new flat cabin and 8x4 chassis, but I am struck by the fact that you cannot add a flasher to the cabin on the roof, I don't know if this function is temporarily off, as You mentioned, but I miss it.
Also, as in the case of several other trucks, you cannot attach (advanced semi-trailer option) to SCS semi-trailers, because the chassis is too high and as I approached such a semi-trailer, it was repelled and it was impossible to attach it to the example semi-trailer from the photo below.
I know that this option can be turned off and hooked up normally or use a zero camera to move a piece and put the truck, but I do not want to do it commonly.
I haven't found any other conspicuous mistakes yet.
Posted: 02.10.2019, 16:18
by Admin-RTA
Teddy_PL, Hello Teddy
set above part1 / part2
ats_20191002_160743_00.png
► Show Spoiler
ats_20191002_160720_00.png
ats_20191002_160656_00.png
k200_v15.1_fix_antenna.scs
Posted: 06.10.2019, 20:34
by Alex D
всем привет. я вот не знаю я такое только имею или это общий недочет. как видите различия между этими скриншотами очень большое. на первом который без руля отсутствуют дворники, стрелки приборов, педали ну и вот такие вот дела. это чего так у меня что не так или не у меня помогите уважаемые разобраться. спасибо.
ats_20191006_201736_00.png
ats_20191006_201728_00.png
Posted: 07.10.2019, 00:00
by Admin-RTA
Приветствую.Думаю конфликт с pma в аниме.Я и забыл про этот руль...Завтра посмотрю.
Added after 57 minutes 59 seconds:Alex D, Исправил.Завтра залью в вашу папку.
Спасибо что сообщили
20191007004824_1.jpg
ats_20191007_005224_00.png
K200 15.1 for ATS and ETS2.
Posted: 08.10.2019, 01:54
by Teddy_PL
I got the K200 15.1 upgrade to Ats yesterday and found some changes in the version for Ats and Ets2.
Well, in the version for Ats I noticed that on the dashboard at the speed indicator this smaller display shows how many kilometers/miles I drove this truck and although I change the information on the on-board computer (the one on the right), this smaller display shows how many kilometers/miles I drove.
However, in the Ets2 version, I noticed that this display as soon as I change the information on the on-board computer shows me some of the information from the on-board computer.
I don't know if this is the intended goal, but I think it shouldn't be like that.
Ats:Ets2:
Wipers not correct
Posted: 19.11.2019, 13:23
by 8V92
The rain is obscuring the vision, see where the rain has wiped clean! The center of drivers view is not clear, i know the windscreen is curved but is this modeled in the sim?
https://www.youtube.com/watch?v=MTjXgZv4pfohttps://www.youtube.com/watch?v=MTjXgZv4pfo
Posted: 19.11.2019, 18:00
by Admin-RTA
8V92, Hello Ian!
Thank you for your message
We fixed the wipers for ETS2
ets2_20191119_162440_00.png
ets2_20191119_162435_00.png
Set above Part2 for ATS
ats_20191119_165058_00.png
ATS_k200_v15.2_fixed_wipers.scs
Posted: 20.11.2019, 07:00
by 8V92
Admin-RTA wrote:8V92, Hello Ian!
Thank you for your message
We fixed the wipers for ETS2
Thank you very much Team.
Posted: 22.11.2019, 01:00
by speedy210380
more tail light options for it