Page 9 of 10

Posted: 26.01.2018, 17:10
by exether_mega
Admin-RTA wrote:
exether_mega wrote:Hello guys,

I try to reskin the high cab but the truck is not appearing in ETS2 Studio. Any idea ? Thanks for the help :wink:
Renault T
variant: Cab_eu
variant: Cab_uk
variant: Cab_low_eu
variant: Cab_low_uk
name renot
Chs_l4x2
Chs_h4x2
Chs_l6x4_a
Chs_h6x4_a
Chs_l6x2_4
Chs_h6x2_4

Dummy question but how it is supposed to help me ? Why your trucks are not appearing in ETS2 Studio ? How Am I supposed to reskin them ?

Posted: 26.01.2018, 18:28
by Admin-RTA
example
Mack
example_mack_ets2 studio .png

Mack Superliner
variant: b_cabin
variant: m_cabin
name liner
Chs_a_eu
Chs_b_eu
Chs_a_uk
Chs_b_uk
Chs_m_eu
Chs_m_uk

ws4800
ets2 studio ws4800.png

ws4800
variant: a_cabin
variant: b_cabin
name 4800w
Chs_a_eu
Chs_b_eu
Chs_a_uk
Chs_b_uk

Posted: 28.01.2018, 00:34
by exether_mega
Thanks for the tip. I put in the Mack but now I need toi put the Renault T and the Volvo FH.
Can you do the same scrrenshot as for the Mack for both of them ? Thanks a lot fot your help and kindness !

Posted: 28.01.2018, 15:39
by Admin-RTA
exether_mega wrote:Thanks for the tip. I put in the Mack but now I need toi put the Renault T and the Volvo FH.
Can you do the same scrrenshot as for the Mack for both of them ? Thanks a lot fot your help and kindness !
Renault T

Renault T
variant: Cab_eu
variant: Cab_uk
variant: Cab_low_eu
variant: Cab_low_uk
name renot
Chs_l4x2
Chs_h4x2
Chs_l6x4_a
Chs_h6x4_a
Chs_l6x2_4
Chs_h6x2_4

Volvo FH 16
variant: cabin_8x4
variant: cabin_4x2
name volvo.fh_fh16
chs_8x4rta
chs_8x4scs
chs_6x2_4a
chs_6x2_4a2
chs_6x2_4m
chs_6x2_4m2
chs_6x2t
chs_6x2t2
chs_4x2rta
chs_4x2scs

Posted: 29.01.2018, 16:03
by darkbullseye
Maybe you can in future make the footsteps and wheelcovers in paint....

Like this

https://imgur.com/a/z7dpX

Posted: 23.04.2018, 23:55
by Marina
можно обнову получить та деньги та уплачены

Posted: 24.04.2018, 16:36
by Teddy_PL
Good morning, :smile:

Recently, as I looked through the photos of trucks, I had a few suggestions about the Range T.

1.Painting from the Magnum and Premium versions:
► Show Spoiler


2.The choice of such wheels as in the pictures, because I noticed that in most photos they have just such wheels, I mean more accurately these gray hubcaps and screws so that you can choose the standard:

► Show Spoiler


3.Also adding such a chassis configuration as in the picture:

► Show Spoiler

Posted: 20.05.2018, 16:50
by Alex D
всем доброго времени суток. мне ваши модели очень нравятся и я этого не скрываю. в общем я человек не притязательный но очень бы хотелось надеяться на будущее что вы сможете увеличить джипиэс навигатор у рено в7.3 на данный момент. я конечно все понимаю и все же надеюсь что мою просьбу услышат и мне очень хотелось бы чтобы по диагонали он стал немного побольше. желаю вам всяческих успехов.

Low Deck

Posted: 23.08.2018, 00:59
by damian1962
Part of the
Very Please add 4x2 version lowdeck in future updates.
Is it possible to do ?
Thank you your whole team RTA

HP

Posted: 27.08.2018, 06:15
by Bino
I love this truck, just the horsepower seems a bit weak sometimes. Maybe can have a little bit more :)

Posted: 10.12.2018, 06:20
by Admin-RTA
if you have a mistake in Renault t -1.33 dashboard install this mod
Fix_1.33_Renault_T_Dashboard.scs

Posted: 25.01.2019, 17:27
by irhejja
Hi all, not sure if this has been reported yet, but when I use the Renault T the steering wheel emblems of some of the stock SCS trucks get dark, for example on the Renault Premium and Magnum and the older Volvo VH, also old Iveco Stralis...

I tried it with completely new, clean profile (only RTA Renault T mod activated) and it's the same, if I remove it it's fine, so I assume it's being caused by this mod. :think:

Posted: 13.05.2019, 20:43
by irhejja
So no one noticed the issue above? :(

Posted: 13.05.2019, 20:46
by Admin-RTA
irhejja, Hello
I did not understand your question. Can you show a screenshot?

Renault Ranger T.

Posted: 13.05.2019, 23:36
by NMdestructeur67
Hello, here I would like to know if there was the possibility to paint the steps of the cab, rear mudflaps of the Renault Ranger T.

Image
Image


Sincerely : NMdestructor67.

Posted: 13.05.2019, 23:54
by Admin-RTA
hello
part1
vehicle/truck/reno_t/textures/
renault_textures.dds - change with your version
example_r_t.png

Renault Ranger T.

Posted: 14.05.2019, 12:30
by NMdestructeur67
Admin-RTA wrote:hello
part1
vehicle/truck/reno_t/textures/
renault_textures.dds - change with your version
example_r_t.png

Thanks Admin-RTA , thank you for the speed of return.

Posted: 18.05.2019, 21:04
by irhejja
Admin-RTA wrote:irhejja, Hello
I did not understand your question. Can you show a screenshot?

Sure, see the screenshots. Logo on the steering wheel is dark on certain trucks (SCS Renault Premium, SCS Renault Magnum, SCS Iveco Stralis, SCS Mercedes-Benz Actros, SCS Volvo FH16 2009). This happens with completely clean profile as well. Other trucks are OK.

Posted: 18.05.2019, 23:33
by Admin-RTA
Hello.
fixed in version 7.5
open part1
material / metal
and replace brushed_metal.dds and brushed_metal.tobj
metal.zip

ETS 2 Renault T v7.5.1 Dx9 and Dx11.

Posted: 09.06.2019, 15:33
by Teddy_PL
I found a few bugs regarding the new version 7.5.1.

1. A small 6x2 chassis error, looks like a 6x2/4 chassis.

Image

2. When configuring/choosing a color in one of the available painting is an error when I choose my own colors, then after clicking confirm to change automatically to the colors that are shown at the beginning of the selection. This also happens from the level of "My Trucks". I did not check with other available paintings.

Image

Image

Image

3. When we choose the color and go to the next step of configuring the truck (pushpins) then if you choose a setting for example a painted front bumper, we also reset the colors of the truck if we chose our own. I did not check on other paintings.

4. In the 6x2/4 chassis configuration, the raised central axis does not turn into the middle axis and it should. He would fix it himself, but I can not because in part 1 there is no needed folder/file responsible for it, maybe there is another part inaccessible to me.

And it would be so much for now that I will find something I will let you know. ;)

Added after 1 hour 14 minutes:
ETS 2 Renault T v7.5.1 Dx9 and Dx11.
5. When I buy a truck and change to it from another truck, I try to press the ESC key and, for example, go to the menu or map menu, but unfortunately I get kicked from the game to my desktop every time. I'm running the game on Dx9.

Error from the gamelog:

Code: Select all

00:06:13.721 : <ERROR> f:\build_bot\ssd_win_slave\final_build_ets2_135_windows_bin_steam_x64\build\prism\src\p3core\collections/arrays/arrays_base_impl.h(491): ??A?$array_t@Ur_buffer_segment_t@prism@@@prism@@QEAAAEAUr_buffer_segment_t@1@_K@Z: Index outside array boundaries.