Page 6 of 7
Posted: 08.04.2018, 01:23
by SirAeleon
Hey guys,
I found an issue with the new Mack 4.1 US Version in ETS2.
I first bought the truck with the australian big sleeper and played a bit with the customizing (including/switching some mudflaps) Then I switched to US chassis version and found some mudflaps where there shouldn't be: in the middle of the truck, below surface and hardly to see.
In normal driving you barely see them because they are mostly below the road, but on bridges or the current "WorldOfTrucks" background they are clearly visible. Even in the tiny preview pic of the currently chosen truck they are visible.
As the writing on these mudflaps is visible from behind, I would assume that they belong to the rear fender, which in US model does not exist, because this has only quarter fenders.
Chris
Added after 7 minutes 22 seconds:As I wasn't able to find the according support forum/thread for the US Polar tanker trailer, I add my question to this here:
From your preview pics the trailer is supposed to have a clean, chrome surface. In my ETS2 it has a "SellPlan" texture attached. This looks weird.
I tried to change the load order of the mod (first Part 1 then 2 and vice versa) but this didn't change behaviour. Is there any other change I can try to get rid of that texture?
best
Chris
Posted: 22.04.2018, 01:58
by SirAeleon
*bump*
Any news on my 2 problems?
Posted: 23.04.2018, 02:44
by Admin-RTA
American Motors wrote:Okay so to upgrade/update from the 3.0 to the 4.1 I got rebut it?
Yes, of course you can update
SirAeleon wrote:SirAeleon
Hello!
Sorry friend, I did not answer right away, was busy
Yes, we fixed errors in Mack superliner v4.2 - ATS you can update the model on the site
I'll fix the trailer in a few days. Thank you for your message!
Posted: 24.04.2018, 09:38
by SirAeleon
Great to hear. :D Thanks buddy.
Posted: 25.04.2018, 20:21
by The Dude
Don't if this has been reported or not, but in the 1.31 updated version the left turn signal turns on the hazard lights. The hazard works fine as well as the right turn signal.
Posted: 01.05.2018, 05:05
by Admin-RTA
SirAeleon wrote:SirAeleon
Hello friend!
SirAeleon wrote:From your preview pics the trailer is supposed to have a clean, chrome surface. In my ETS2 it has a "SellPlan" texture attached. This looks weird.
I tried to change the load order of the mod (first Part 1 then 2 and vice versa) but this didn't change behaviour. Is there any other change I can try to get rid of that texture?
ets2_20180501_045514_00.png
► Show Spoiler
ets2_20180501_045150_00.png
ets2_20180501_045001_00.png
ets2_20180501_044750_00.png
ets2_20180501_044643_00.png
Ideas
Posted: 11.05.2018, 06:01
by zachloomis
Really loving the truck. Somethings I'd like to see in a future update are interchangeably of parts (fenders, bumpers.....) between the American and Australian version and to be able to chrome the fenders on the American version and be able to fully chrome or fully paint the tool box under the sleeper on the American version.
Posted: 19.05.2018, 00:28
by sandrro
Приветствую.Хотел спросить,можно как нибудь содрать тонировку с него?С используемыми мною графическими модами очень темно в салоне в сравнение с улицей,спасибо.
different exhausts ?
Posted: 02.01.2019, 23:51
by Charliehorse
can differnt exhausts be added? such as cuved stacks and flat tops as well as no heat shield and an 8v_92 Detroit Diesel ? possibly a double eagle sleeper for bpth chassis ?
mack superliner template help
Posted: 06.01.2019, 10:59
by Jasonxr6t
need help with the mack template. painting the visor and wheel arch yellow changes to blue. mud flaps not showing up with bull bar but was showing up on earlier versions. one of the sun visor shows up yellow while the other shows up blue
Posted: 25.01.2019, 16:48
by irhejja
Hi all!
First of all, I noticed Advanced Coupling still doesn't work in ATS, can you please check that?
1. more options for USA cab, chromed parts, exhausts, etc. I would like to make a US Superliner Magnum, something like this:
http://bulk-share.slickpic.com/album/share/Nx,NIM ... /8202911.0/1300/p/DSC_5926.jpghttps://www.flickr.com/photos/granitefan713/10934816063https://www.bigmacktrucks.com/uploads/monthly_02_ ... 5836-0-40506200-1392685259.jpg2. option for golden dog on the hood (if I'm correct the Macks equipped with Mack engines had golden dog, Macks equipped with other engines like Detroit, CAT, etc. had silver dog).
3. Maybe add the Mack EA7 (6-cylinder) engines as well.
Added after 11 minutes 24 seconds:4. Also, maybe add headache/logging racks?
Posted: 31.01.2019, 05:35
by Bulldog385
^^^ I second this as well. Also would love to see a Single Axle 4x2 version of the SL day cab and a Tri-Axle 8x6 in all 3 sleeper versions as options as well.
Thanks So much for your incredible work/mods.
Posted: 04.02.2019, 18:51
by freitshoma
И если возможно убрать тонировку в салоне,напрягает в темное время суток.
заранее спасибо.А так Mack просто супер !
Posted: 06.02.2019, 10:22
by wombat457
Can you please PLEASE go back to the older style of making templates at 4096 X 4096. These new type of templates such as the T908 and now the Mack are horrendous to work with, they really need be much clearer.
You guys make the absolute ultimate models, there is no question about that. I just wish your templates were as impressive :(
Posted: 10.02.2019, 02:00
by kartal2339
i think at the last superliner .. there is a problem with glass opacity..because when i m in cockpit view outside is more darker than outside cam view... can you fix it?
Posted: 11.02.2019, 20:00
by Admin-RTA
sandrro,
fix_glass_Mack- tinted.scs
tinted 2 times less
fix_glass_Mack.scs
tinted 3 times less
fix_glass_Mack - more transparent.scs
tinted 5 times less
fix_glass_Mack -transparent.scs
Posted: 12.02.2019, 09:01
by room217au
All I'm seeing inside the cab is pink textures everywhere :/
hi...
Posted: 13.02.2019, 01:14
by kartal2339
i think your fix couldnt fix the matter...i think its about glass opacity ...
i used transparent fix ...
ats_20190213_010008_00.png
ats_20190213_010012_00.png
Posted: 13.02.2019, 23:36
by kartal2339
kartal2339 wrote:i think your fix couldnt fix the matter...i think its about glass opacity ...
i used transparent fix ...
ats_20190213_010008_00.png
ats_20190213_010012_00.png
@Admin-RTA
Posted: 14.02.2019, 09:03
by Admin-RTA
Do you use graphic mods?