If You do not receive an email after registering ,check your spam folder in Your mailbox .
Auto registration in the queue from 5 minutes to 12 hours


If you have problems logging on the forum, write your message in the technical support forum
Registration is not required


Technical support Forum

Proposals-Wishes-bugs Kenworth T908

Avatar
Topic author
Admin-RTA
Administrator
Administrator
Posts: 1327
Joined: 04.04.2016
Reputation: 1466 (+1474/−8)
Loyalty: 495 (+502/−7)
With us: 7 years 11 months
Flag: Russia
Contact:

Unread post #101by Admin-RTA » 06.04.2017, 03:04

send a screenshot of what is not working
RHD will be released in version 6.1 (I can tell you, after 7-10 days the exact date )
т908 will release with 6.0.2 and 6.0.3 are in development
version 6.0.1 is ready and sent с 04.04.2017

Avatar
AloneBacon
Прохожий
Прохожий
Posts: 19
Joined: 13.08.2016
Reputation: 11 (+11/−0)
Loyalty: 8 (+8/−0)
With us: 7 years 7 months
Flag: Australia

Unread post #102by AloneBacon » 06.04.2017, 03:07

Admin-RTA wrote:send a screenshot of what is not working
RHD will be released in version 6.1 (I can tell you, after 7-10 days the exact date )
т908 will release with 6.0.2 and 6.0.3 are in development
version 6.0.1 is ready and sent с 04.04.2017


Not on my pc atm but the two Air gauges are not working they are just at zero when i have full air.

So 7-10 days before right hand drive comes out hmm ok

Avatar
Bonno59
VIP
VIP
Posts: 5
Joined: 03.01.2017
Reputation: 1 (+1/−0)
Loyalty: 0 (+0/−0)
With us: 7 years 2 months
Flag: Australia

Unread post #103by Bonno59 » 06.04.2017, 05:54

Hi,
Got the T 908 this morning, installed as per Email, but when I go to pick trailer it won't hook up, the chassis is too high and the trailer pin is too low. Any suggestions?

Avatar
Turt
VIP
VIP
Posts: 42
Joined: 01.07.2016
Reputation: 33 (+33/−0)
Loyalty: 76 (+82/−6)
With us: 7 years 8 months
Flag: Australia

Unread post #104by Turt » 06.04.2017, 06:01

@AloneBacon, in 7-10 days Admin can tell you the exact date of RHD release. Not 7-10 days before it comes out.

Avatar
spinner
VIP
VIP
Posts: 17
Joined: 10.04.2016
Reputation: 3 (+3/−0)
Loyalty: 6 (+6/−0)
With us: 7 years 11 months
Flag: Australia

Unread post #105by spinner » 06.04.2017, 08:57

Interesting that some of you guys are saying you need a RHD version to drive in either Europe or America , where all vehicles are LHD.
Yes , I get its an Aussie truck , but you're driving on the right side of the road. Doesn't it get confusing ?

From day one in ETS2 I drove LHD trucks , because its a simulation and I'm simulating driving in Europe and that's how it would be in real life. I have spent my entire life driving RHD in Australia but why would that carry over to driving in Europe ? That's not realistic. And yet you say it's not realistic to create a LHD Kenworth. Unless you spend the whole time driving on the left in the UK ? Surely not ?

Avatar
FireBlade M
TEAM-RTA
TEAM-RTA
Posts: 232
Joined: 07.04.2016
Reputation: 662 (+664/−2)
Loyalty: 300 (+300/−0)
With us: 7 years 11 months
Location: Нижний Новгород
Flag: Russia
Contact:

Unread post #106by FireBlade » 06.04.2017, 09:14

spinner wrote:Interesting that some of you guys are saying you need a RHD version to drive in either Europe or America , where all vehicles are LHD.
Yes , I get its an Aussie truck , but you're driving on the right side of the road. Doesn't it get confusing ?

From day one in ETS2 I drove LHD trucks , because its a simulation and I'm simulating driving in Europe and that's how it would be in real life. I have spent my entire life driving RHD in Australia but why would that carry over to driving in Europe ? That's not realistic. And yet you say it's not realistic to create a LHD Kenworth. Unless you spend the whole time driving on the left in the UK ? Surely not ?

12.gif
You do not have the required permissions to view the files attached to this post.
3D Artist. 3DS MAX, MAYA, Substance Painter, Zbrush, UE4 https://www.artstation.com/artist/oleg-verhovodov

Avatar
v1perCL
Прохожий
Прохожий
Posts: 24
Joined: 23.08.2016
Reputation: 4 (+4/−0)
Loyalty: 15 (+17/−2)
With us: 7 years 7 months
Flag: Chile

Unread post #107by v1perCL » 06.04.2017, 21:29

Bonno59 wrote:Hi,
Got the T 908 this morning, installed as per Email, but when I go to pick trailer it won't hook up, the chassis is too high and the trailer pin is too low. Any suggestions?

Exctly, The chassis is too high.

Avatar
Bonno59
VIP
VIP
Posts: 5
Joined: 03.01.2017
Reputation: 1 (+1/−0)
Loyalty: 0 (+0/−0)
With us: 7 years 2 months
Flag: Australia

Kenworth T908

Unread post #108by Bonno59 » 07.04.2017, 03:45

Yes that's correct, but is there a fix for it?

Avatar
Topic author
Admin-RTA
Administrator
Administrator
Posts: 1327
Joined: 04.04.2016
Reputation: 1466 (+1474/−8)
Loyalty: 495 (+502/−7)
With us: 7 years 11 months
Flag: Russia
Contact:

Unread post #109by Admin-RTA » 07.04.2017, 04:39

correction of what?trailers?
SCS have a different scale,this problem appeared with version 1.23

Avatar
Bonno59
VIP
VIP
Posts: 5
Joined: 03.01.2017
Reputation: 1 (+1/−0)
Loyalty: 0 (+0/−0)
With us: 7 years 2 months
Flag: Australia

Unread post #110by Bonno59 » 07.04.2017, 05:03

I understand that but is there a fix to lower the chassis on the truck? Or is there a way around that I can pick up trailers like going in sideways ?

Avatar
Topic author
Admin-RTA
Administrator
Administrator
Posts: 1327
Joined: 04.04.2016
Reputation: 1466 (+1474/−8)
Loyalty: 495 (+502/−7)
With us: 7 years 11 months
Flag: Russia
Contact:

Unread post #111by Admin-RTA » 07.04.2017, 05:37

we do not change the scale of the truck,it's stupid
We have trailers in the same scale,but they are put so that it not to catch
here is an example
20170407043047_1.jpg

20170407042455_1.jpg

20170407043010_1.jpg

it only remains to turn off the progressive coupling
You do not have the required permissions to view the files attached to this post.

Avatar
mharr304
VIP
VIP
Posts: 160
Joined: 12.04.2016
Reputation: 38 (+39/−1)
Loyalty: 111 (+131/−20)
With us: 7 years 11 months
Location: Rockhampton, QLD, Australia
Flag: Australia
Contact:

Unread post #112by mharr304 » 07.04.2017, 05:46

have the double trailers been updated yet because i have the version for 1.26 and the advance coupling isn't working

Avatar
Topic author
Admin-RTA
Administrator
Administrator
Posts: 1327
Joined: 04.04.2016
Reputation: 1466 (+1474/−8)
Loyalty: 495 (+502/−7)
With us: 7 years 11 months
Flag: Russia
Contact:

Unread post #113by Admin-RTA » 07.04.2017, 06:20

trailers updated to 1.27 and 1.6

Added after 2 minutes 44 seconds:
no wonder people enjoy
https://steamcommunity.com/sharedfiles/filedetail ... 7056608&searchtext=deleted ats

Avatar
brodze287
VIP
VIP
Posts: 11
Joined: 17.04.2016
Reputation: 1 (+1/−0)
Loyalty: 8 (+8/−0)
With us: 7 years 11 months
Flag: Australia

Unread post #114by brodze287 » 07.04.2017, 10:18

for next update can you make the t908 so it gets better fps on low end computers or make two versions 1 that is high for high end computers and 1 that it lower for low end computers. that way people that have paid for this mod can actually enjoy it

Avatar
truckjunkie
Знаток
Знаток
Posts: 77
Joined: 18.02.2017
Age: 39
Reputation: -49 (+10/−59)
Loyalty: 0 (+0/−0)
With us: 7 years 1 month
Location: Bergen
Flag: Norway

Unread post #115by truckjunkie » 07.04.2017, 10:39

Admin-RTA wrote:we do not change the scale of the truck,it's stupid
We have trailers in the same scale,but they are put so that it not to catch
here is an example
20170407043047_1.jpg

20170407042455_1.jpg

20170407043010_1.jpg

it only remains to turn off the progressive coupling


he's not talking about rescaling the truck.
he's talking about the 5th wheel point on the trailer.

also to other people.

if you are unable to connect to a trailer, check and see if advanced coupling is enabled.
if it is, that is most likely the reasson you are unable to connect. should work if you turn it off.

Avatar
v1perCL
Прохожий
Прохожий
Posts: 24
Joined: 23.08.2016
Reputation: 4 (+4/−0)
Loyalty: 15 (+17/−2)
With us: 7 years 7 months
Flag: Chile

Unread post #116by v1perCL » 07.04.2017, 18:21

truckjunkie wrote:
Admin-RTA wrote:we do not change the scale of the truck,it's stupid
We have trailers in the same scale,but they are put so that it not to catch
here is an example
20170407043047_1.jpg

20170407042455_1.jpg

20170407043010_1.jpg

it only remains to turn off the progressive coupling


he's not talking about rescaling the truck.
he's talking about the 5th wheel point on the trailer.

also to other people.

if you are unable to connect to a trailer, check and see if advanced coupling is enabled.
if it is, that is most likely the reasson you are unable to connect. should work if you turn it off.

With advanses coupling turned off it works fine, but is a shame that this truck doesn't work with advansed coupling.
The western star WS4800 has no problem at all.

Added after 39 minutes 49 seconds:
here a picture of the problem, chassis is too high.

Image

Avatar
truckjunkie
Знаток
Знаток
Posts: 77
Joined: 18.02.2017
Age: 39
Reputation: -49 (+10/−59)
Loyalty: 0 (+0/−0)
With us: 7 years 1 month
Location: Bergen
Flag: Norway

Unread post #117by truckjunkie » 07.04.2017, 19:08

I thought the advanced coupling was dependant of each trailer.
Not truck.... :think:

Avatar
Topic author
Admin-RTA
Administrator
Administrator
Posts: 1327
Joined: 04.04.2016
Reputation: 1466 (+1474/−8)
Loyalty: 495 (+502/−7)
With us: 7 years 11 months
Flag: Russia
Contact:

Unread post #118by Admin-RTA » 07.04.2017, 19:27

v1perCL wrote:but is a shame that this truck doesn't work with advansed coupling.
who told you that т908 not working advanced coupling?
everything works fine :weirdface:
you offers us to change the scale of the truck? :toothless:
or the frame under the press that under the trailers scs came? :fie:

Avatar
v1perCL
Прохожий
Прохожий
Posts: 24
Joined: 23.08.2016
Reputation: 4 (+4/−0)
Loyalty: 15 (+17/−2)
With us: 7 years 7 months
Flag: Chile

Unread post #119by v1perCL » 07.04.2017, 20:35

Admin-RTA wrote:
v1perCL wrote:but is a shame that this truck doesn't work with advansed coupling.
who told you that т908 not working advanced coupling?
everything works fine :weirdface:
you offers us to change the scale of the truck? :toothless:
or the frame under the press that under the trailers scs came? :fie:

I tested myself and it doen't work. Some other people in another post says it doesn't work either.
I can record a video if you want, to show you the problem.

Avatar
Topic author
Admin-RTA
Administrator
Administrator
Posts: 1327
Joined: 04.04.2016
Reputation: 1466 (+1474/−8)
Loyalty: 495 (+502/−7)
With us: 7 years 11 months
Flag: Russia
Contact:

Unread post #120by Admin-RTA » 07.04.2017, 20:36

show video

Added after 26 minutes 20 seconds:
https://www.youtube.com/watch?v=KKzr-SESlKQ


Return to “Kenworth T908”

Who is online

Users browsing this forum: 3 guests