Hello friends. we are currently preparing updates 1.37
In early May, we will begin to create 3D parts for all mods (chassis, bumpers, exhaust pipes, etc.)
if you have ideas and requests for any models, I remind you that there are topics for each model, where you can write your wishes for any modS viewforum.php?f=92 ( to leave a comment with wishes registration is required on the forum)

Think about what you would like, and if possible, we will do it. and add in one of the next updates
because it takes time to create and add parts, we ask you to think and write well in advance because in the beginning of May we will start creating parts.

Also: We prepared and tuned several new trucks that we would like to present after the release of update 1.37

We hope that we do not need much time to complete the setup of new trucks. We think that you will like these trucks, and they will be in your collection

P.S Ford LTL9000, which is rendered , will be a free mod for everyone. the exterior is ready and exported for ATS and ETS-2, the interior is under development.

Regards, RTA-Mods

Hello everyone for me the thing missing from the truck in general from RTA, are the tri-drive chassis since SCS integrated the heavy loads and the ROAD TRAIN. thank you for your work and the quality of your mods.

amazing news, can't wait to drive that ford and hopefully we get a vnl860 or a cascadia too in the future.

Dragster94 wrote:Hello everyone for me the thing missing from the truck in general from RTA, are the tri-drive chassis since SCS integrated the heavy loads and the ROAD TRAIN. thank you for your work and the quality of your mods.

I agree 100%

Very much looking forward to having an LTL9000 in ATS.
Especially if I can put a Eaton 18spd with 14.40-0.73 with Retarder Gbox and 3.20 (or 3.85) Final Drive in it.

If there's one truck that would stop me friving the WS4800 all the time it'll be this.

Have we added any new custom features to the trucks?

Can't wait for the LTL 9000 guys; this is one of my all time favorite trucks and it has not been done at the quality it deserves by anyone in the modding community yet!

Amazing News! Thx

Bonjours a tous,pour les mises a jour a venir serait'il possible de retirer l'éclairage de cabine qui s'active en même temps que les gyrophares sur les cabines actuel du K108 et les cabines 2.8 pour le K200 car les nouvelles cabine ajouté a la version 15.2 n'ont pas ce problème. merci a vous et bon courage car le restant de l'année parait bien en travail.

Got the 359 update looking forward to the Mack SL and the 908 soon. I also have my interest peek about the work in progress and the 379. personally I really enjoy all the older models. I need that Ford and I am wondering when the Cat truck will get an update too.

has the t908 bin updated to 1.37 as had no update

908 not ready yet.

Cant wait for the mack!

FireBlade wrote:

5.129.jpg

01.jpg

Hello friends. we are currently preparing updates 1.37
In early May, we will begin to create 3D parts for all mods (chassis, bumpers, exhaust pipes, etc.)
if you have ideas and requests for any models, I remind you that there are topics for each model, where you can write your wishes for any modS viewforum.php?f=92 ( to leave a comment with wishes registration is required on the forum)

Think about what you would like, and if possible, we will do it. and add in one of the next updates
because it takes time to create and add parts, we ask you to think and write well in advance because in the beginning of May we will start creating parts.

Also: We prepared and tuned several new trucks that we would like to present after the release of update 1.37

We hope that we do not need much time to complete the setup of new trucks. We think that you will like these trucks, and they will be in your collection

P.S Ford LTL9000, which is rendered , will be a free mod for everyone. the exterior is ready and exported for ATS and ETS-2, the interior is under development.

Regards, RTA-Mods

Hallo @Fireblade

The Truck is very cool, i got an idea, i know it´s much of work but i´m ready to pay it for. Could you and your team make the Capover-Version of the CL 9000



Maybe as a set?

I would pay for it.

Thank you friends for your comments, be sure to consider all your wishes.
We are already working on adding new details for future updates of all our mods.

@Bomberman82
I already created a Ford CL9000, I need to look at the 3D model because I haven’t opened it in 3D editors for a long time) I remember that the exterior there is about 90 or 95% ready, I’m not sure that we will have time to do it before the end of 2020, because We have plans for several other trucks this year.

Any chance that the K108 will get the 2.3 cab like the K200?

FireBlade wrote:Thank you friends for your comments, be sure to consider all your wishes.
We are already working on adding new details for future updates of all our mods.

@Bomberman82
I already created a Ford CL9000, I need to look at the 3D model because I haven’t opened it in 3D editors for a long time) I remember that the exterior there is about 90 or 95% ready, I’m not sure that we will have time to do it before the end of 2020, because We have plans for several other trucks this year.

Thanks for your kindness, don´t need to be rush can wait, i think that is a lot of work to make this, i´m not familiar with 3D Model Programms and making Mods in this Quality! I would be very appreciated.

And i don´t need it for free, when i was pay for it. Thats a lot´s of time and effort that you spend.

Be healty and keep up the good work

any ETA on the 1.37 Mack?

I see Rene Nate - who is well known for stealing mods - is peddling an LTL9000, I hope it isn;t anything to do with your one.

I hope I am posting this in the correct category:
I have found that there aren't any really good MAN trucks for ETS2, then I saw yours and wanted it straight away !
I noticed there was a note on the popularity of the truck and that it at some point would be discontinued, so my question is: as of today, is there a plan to update it for 1.37/1.38 ?