If You do not receive an email after registering ,check your spam folder in Your mailbox .
Auto registration in the queue from 5 minutes to 12 hours


If you have problems logging on the forum, write your message in the technical support forum
Registration is not required


Technical support Forum

Proposals-Wishes-bugs k 200

Avatar
Nobody3011
Проверенный
Posts: 0
Joined: 16.12.2019
Age: 30
Reputation: 0 (+0/−0)
Loyalty: 0 (+0/−0)
With us: 4 years 3 months
Location: Vienna
Flag: Austria
Contact:

Lighting Nodes

Unread post #221by Nobody3011 » 16.12.2019, 19:43

Hey guys, first thank you for this wonderful truck. i drive him in ats.

Wishes: it is possible to add some lighting nodes to add custom leds like the boremans from the steam workshop ?



ps: i´m sorry for my bad english.

Avatar
Hondor1986
VIP
VIP
Posts: 6
Joined: 03.05.2018
Age: 37
Reputation: 0 (+0/−0)
Loyalty: 0 (+0/−0)
With us: 5 years 10 months
Location: Damme, Germany
Flag: Germany

Unread post #222by Hondor1986 » 17.12.2019, 18:58

Hi

I found an optical error.
The left wiper is in the wrong position, from the inside the wiper should be further left.
I marked the position in color
Can you change it to make it look better?

You hardly see anything when it rains, because the rain covers half of it.

Translated with Google

Image

Image

Avatar
Topic author
Admin-RTA
Administrator
Administrator
Posts: 1327
Joined: 04.04.2016
Reputation: 1466 (+1474/−8)
Loyalty: 495 (+502/−7)
With us: 7 years 11 months
Flag: Russia
Contact:

Unread post #223by Admin-RTA » 17.12.2019, 19:20


Avatar
Hondor1986
VIP
VIP
Posts: 6
Joined: 03.05.2018
Age: 37
Reputation: 0 (+0/−0)
Loyalty: 0 (+0/−0)
With us: 5 years 10 months
Location: Damme, Germany
Flag: Germany

Unread post #224by Hondor1986 » 17.12.2019, 19:23

Hello Admin-RTA

Thank you very much!

Avatar
Hondor1986
VIP
VIP
Posts: 6
Joined: 03.05.2018
Age: 37
Reputation: 0 (+0/−0)
Loyalty: 0 (+0/−0)
With us: 5 years 10 months
Location: Damme, Germany
Flag: Germany

Unread post #225by Hondor1986 » 17.12.2019, 23:26

Hi

I found an optical error.
The angle of the wiper is not correct.
in the comparison from the inside to the outside, that doesn't fit.
And there are no raindrops on the right side of the windshield.
Can you fix that please.

Image

Image

Image

Image

Avatar
Hondor1986
VIP
VIP
Posts: 6
Joined: 03.05.2018
Age: 37
Reputation: 0 (+0/−0)
Loyalty: 0 (+0/−0)
With us: 5 years 10 months
Location: Damme, Germany
Flag: Germany

Unread post #226by Hondor1986 » 21.12.2019, 01:50

Hi there
And Merry Christmas.
I have a wish.
Can you get the Daf XF and Daf XF Euro6 mirrors ready for the Kenworth K200?

Thank you very much.!


Image

Image

Image

Image

Avatar
TommoK200
VIP
VIP
Posts: 192
Joined: 11.04.2016
Reputation: 178 (+178/−0)
Loyalty: 233 (+233/−0)
With us: 7 years 11 months
Flag: Great Britain

Unread post #227by TommoK200 » 17.01.2020, 20:11

Hiya RTA,

Happy New Year to you guys, would you mind taking a look at the template/map for the K200 around the left side of the cab? With my skins I'm noticing alittle jump but the lines are straight in photoshop and the template doesn't show any change either;

Image, on Flickr

The other side of the cab is totally fine :smile:

Thanks

Tommo

Avatar
sneederbilt
VIP
VIP
Posts: 14
Joined: 14.05.2019
Reputation: 2 (+2/−0)
Loyalty: 0 (+0/−0)
With us: 4 years 10 months
Flag: United States of America

Unread post #228by sneederbilt » 27.03.2020, 23:38

beacons on top of the cab would be nice for the heavy version, headache rack(s), RED lights as an option facing rear of truck

Avatar
room217au
VIP
VIP
Posts: 362
Joined: 29.06.2016
Reputation: 93 (+93/−0)
Loyalty: 107 (+107/−0)
With us: 7 years 8 months
Flag: Australia

Unread post #229by room217au » 30.03.2020, 04:39

Interesting situation in v15.2 K200
The RHD, uk version, of both interior model and ext_interior models exist in ATS version.
Can anyone tell me why this is?
I'm reducing the model sizes with Blender and wonder if I can just delete those uk models from the ATS truck.
I understand that mats and textures and tobjs can be useful but why the models have to be there?
Thanks for any help.
Two wrongs don't make a right, but three lefts.. do.

Avatar
speedy210380
VIP
VIP
Posts: 13
Joined: 17.04.2018
Reputation: 4 (+4/−0)
Loyalty: 0 (+0/−0)
With us: 5 years 11 months
Flag: Australia

Unread post #230by speedy210380 » 10.04.2020, 13:41

right hand drive, selectable head light options in game, custom slots for roof lights tail lights, heavy haul fenders

Avatar
Kiwimike7
VIP
VIP
Posts: 30
Joined: 29.06.2016
Reputation: 4 (+4/−0)
Loyalty: 0 (+0/−0)
With us: 7 years 8 months
Flag: New Zealand

Unread post #231by Kiwimike7 » 30.04.2020, 10:41

Has anyone seen anything like this before? From time to time my windscreen goes green and I can't see anything. If I change to a different camera there is still some around but not as bad.

Image

Cheers
Mike

Avatar
room217au
VIP
VIP
Posts: 362
Joined: 29.06.2016
Reputation: 93 (+93/−0)
Loyalty: 107 (+107/−0)
With us: 7 years 8 months
Flag: Australia

Unread post #232by room217au » 30.04.2020, 12:28

That's graphics card.
Two wrongs don't make a right, but three lefts.. do.

Avatar
Kiwimike7
VIP
VIP
Posts: 30
Joined: 29.06.2016
Reputation: 4 (+4/−0)
Loyalty: 0 (+0/−0)
With us: 7 years 8 months
Flag: New Zealand

Unread post #233by Kiwimike7 » 01.05.2020, 09:11

@room217 thanks mate but the funny thing is it only happens in the K200. No other truck causes it. I have been monitoring the temp of my whole system in case something is overheating but all good. Maybe I will update the drivers and see.
Mike

Avatar
Geronimo_Express
VIP
VIP
Posts: 177
Joined: 12.01.2017
Age: 62
Reputation: 245 (+245/−0)
Loyalty: 208 (+209/−1)
With us: 7 years 2 months
Location: Taree, Australia
Flag: Australia
Contact:

Unread post #234by Geronimo_Express » 02.05.2020, 08:17

That's a weird one Mike, is that in v1.37?

It looks reminiscent of some of the early DX11 glitches, are there any clues in your game.log? Another possible culprit might be something gone amiss in the nVidia inspector settings, I once ended up with two concurrent sets of nVidia inspector settings in which one was pushing Open GL and the other DX, and that caused some weird stuff to happen. If you upload your game.log I can have a look through it if you like.
OziModz Custom Mods
https://ozimodz.com

Avatar
room217au
VIP
VIP
Posts: 362
Joined: 29.06.2016
Reputation: 93 (+93/−0)
Loyalty: 107 (+107/−0)
With us: 7 years 8 months
Flag: Australia

Unread post #235by room217au » 02.05.2020, 13:58

Then again, it could be something weird.
I had a thin black line in the windshield of the 908. Could not figure it out, because it moved with the cabin physics.
Turns out I had the seat back too far :/
Two wrongs don't make a right, but three lefts.. do.

Avatar
Kiwimike7
VIP
VIP
Posts: 30
Joined: 29.06.2016
Reputation: 4 (+4/−0)
Loyalty: 0 (+0/−0)
With us: 7 years 8 months
Flag: New Zealand

Unread post #236by Kiwimike7 » 03.05.2020, 11:25

@Geronimo_Express here's a link to my game log, this is straight after it happened today.

https://pastebin.com/syWCMwxw

Cheers
Mike

Avatar
Geronimo_Express
VIP
VIP
Posts: 177
Joined: 12.01.2017
Age: 62
Reputation: 245 (+245/−0)
Loyalty: 208 (+209/−1)
With us: 7 years 2 months
Location: Taree, Australia
Flag: Australia
Contact:

Unread post #237by Geronimo_Express » 04.05.2020, 05:20

Hi Mike,

I have read through your game.log and the only error directly relating to the loading of the K200 is a failure to load an add-on hookup array for the plates, LEDs and fog lights due to an LED data name being already in use by another mod, however this is an old issue which doesn't appear to affect the truck and wouldn't affect the rendering of the windscreen. I have a suspicion that it may be a mod conflict problem, which can even occur sometimes when other mods are not activated in the mod manager, so it can be tricky to identify.

However, there are a few things that you might like to try to see if it identifies/fixes the problem. I have listed them in the order with the easiest first:

1) It looks like you are driving a 5760x1080px monitor with a GTX 960 with 2GB of V-RAM. The rendering of glass and reflections are among the most V-RAM intensive processes for the graphics card, so it may be that the combination of a certain complexity of redraw of the image visible through the windscreen along with the detailed cab view, mirrors etc at 5760x1080px exceeds the amount of V-RAM available on the graphics card, which could perhaps result in it buffering part of the render leaving the un-rendered black patch across the windscreen. You could test this by significantly reducing your graphics quality settings in ATS and see if that alleviates the problem.

2) I have seen issues in the past after an update of the trucks where the truck already owned within the game wouldn't render correctly after the update, doing things like failing to render the metal skin of the doors. The solution in that case was to sell the existing truck and then re-buy it.

3) If the above fail to fix the problem, then I would create a new profile to test further as follows:

a) Create the new profile with all mods deactivated in the mod-manager.
b) Quit the game.
c) Temporarily remove all mods from your mod folder to a backup folder elsewhere on your hard drive.
d) Put only the new K200 into the mod folder.
e) Restart the game and activate the K200 in the mod manager, (and make sure that there are no Steam Workshop mods activated)
f) Test to see if the problem still exists.

If this fixes the issue, then you could add other individual mods to the mod folder and activate them one at a time so as to identify which of them are causing the conflict.

If not and I can be of any further help feel free to send me a PM , (it might be better than me filling up this thread with my long winded babblings) :wink:

Cheers
Ian
OziModz Custom Mods
https://ozimodz.com

Avatar
Kiwimike7
VIP
VIP
Posts: 30
Joined: 29.06.2016
Reputation: 4 (+4/−0)
Loyalty: 0 (+0/−0)
With us: 7 years 8 months
Flag: New Zealand

Unread post #238by Kiwimike7 » 04.05.2020, 11:35

Thanks Ian for that very detailed response. I will work my way through these over the next few days and report back.
Cheers
Mike

Avatar
Geronimo_Express
VIP
VIP
Posts: 177
Joined: 12.01.2017
Age: 62
Reputation: 245 (+245/−0)
Loyalty: 208 (+209/−1)
With us: 7 years 2 months
Location: Taree, Australia
Flag: Australia
Contact:

Unread post #239by Geronimo_Express » 04.05.2020, 11:37

No worries Mike, let me know if I can help further.
Cheers
Ian
OziModz Custom Mods
https://ozimodz.com

Avatar
room217au
VIP
VIP
Posts: 362
Joined: 29.06.2016
Reputation: 93 (+93/−0)
Loyalty: 107 (+107/−0)
With us: 7 years 8 months
Flag: Australia

Unread post #240by room217au » 05.05.2020, 11:39

Geronimo_Express wrote:it might be better than me filling up this thread with my long winded babblings
If others experience this issue, it's always good to have all the suggestions visible to everyone, imho.
so, babble away :)
Two wrongs don't make a right, but three lefts.. do.


Return to “Kenworth K200”

Who is online

Users browsing this forum: 2 guests