Page 7 of 14

Posted: 15.04.2017, 00:39
by ChrisHusky
Есть проблема с крашеными дисками, а именно - на одной из сторон видно пятно:
Image
Это не тень от хаба: если сдать назад, то это темное пятно тоже начнет перемещаться:
Image Image
На алюминиевых дисках это заметно меньше, на хромированных не заметно вовсе. С видео не особо дружу, так что снял уж как смог, более-менее должно быть понятно: https://youtu.be/F1olomH-60k

Posted: 15.04.2017, 01:40
by Admin-RTA
Это тень от суслика :toothless:

Posted: 15.04.2017, 03:30
by Mr_Snow
I wish we had the Australian dash back for the K200, miss it :sad:

K200 UPDATE

Posted: 15.04.2017, 05:41
by Kiwimike7
Have tried the truck on a clean profile with no other mods running, and still get the same issue with the air pressure.

Cheers
Mike

Posted: 15.04.2017, 05:46
by Admin-RTA
I will try to fix in the coming days
A lot of work, 2 more days will be busy can't even look

transmission

Posted: 15.04.2017, 12:00
by V8Bolle
DE
Wäre es möglich, die Getriebe-Datei im mod-Teil1 unterzubringen? Bei allen LKW?
Die Getriebe-Datei im Teil1 kann ich bearbeiten, wie beim Mack und T908.
Beim K200 und WS4800 ist das leider nicht möglich, weil sich bei beiden die Getriebe-Datei in einem verschlüsselten Teil befindet.
Ich habe jetzt herausgefunden, wie das so funktioniert und habe mir für den Mack ein 12-Gang-Getriebe an meine Vorlieben angepasst.
Das Ergebnis ist deutlich mehr Spielspass für mich. :wink:
Erklärung:
Ich fahre gerne untertourig, schalte aber im Stadtverkehr nicht so gerne alle Gänge durch.
Da ich nur manuell (sequentiell) schalte, passt für mich kein angebotenes Getriebe so richtig.
Jetzt aber habe ich beim Anfahren den passenden Gang schon nach einem Schaltvorgang, da die unteren Gänge viel weiter gespreizt sind.
Die oberen Gänge liegen näher beieinander, sodass ich in den Bergen immer die richtige Drehzahl habe.
In den weiten amerikanischen Ebenen kann ich mit 1250/min dahinrollen.
Der 720 PS Mack V8 hat genügend Kraft dafür.
Und so weiter...
Es wäre schön, wenn man derartige Anpassungen bei allen eurer LKW machen könnte.

EN
Would it be possible to accommodate the transmission file in the mod part1? On all trucks?
The gear file in part1 I can edit, as with the Mack and T908.
With the K200 and WS4800 is unfortunately not possible, because with both the transmission file is in an encrypted part.
I have now figured out how this works so I have adapted for the Mack a 12-speed transmission to my preferences.
The result is much more fun for me. :wink:
Statement:
I like to drive with little engine speed, but do not like to drive all the gears in the city traffic.
Since I switch only manually (sequential), does not fit for me offered gear so correctly.
Now, however, I have the appropriate gear at the start after a gear shift, since the lower gears are spread a lot more.
The upper gears are closer together, so I always have the right speed in the mountains.
In the wide American plains I can roll with 1250 / min.
The 720 hp Mack V8 has enough power for it.
And so on ...
It would be nice if you could make such adjustments on all your trucks.

best regards
Bolle

Posted: 15.04.2017, 12:27
by Admin-RTA
It's not a problem
We will add a part of 1 all the necessary files

Posted: 15.04.2017, 13:51
by V8Bolle
:clap:
Thank you!
:class:

Posted: 21.04.2017, 10:16
by mharr304
just wondering what ever happened to this bullbar?
bullbar.png

Posted: 24.04.2017, 18:38
by Stan_99
Cегодня наконец добрался до ATS. При настройке салона FPS жёстко валится до 30 кадров! Раньше такого не было, надо бы разобратся господа.

Posted: 24.04.2017, 18:50
by Admin-RTA
Раньше такое было,как в АТС так и в ЕТС2.(в версии 1.24 например)
После повторного запуска игры,проблемы пропадают.

Posted: 24.04.2017, 18:54
by Stan_99
Ничего подобного как было так и осталось. :eh:

Posted: 07.05.2017, 19:28
by Boogyjah
Any way to get standard in game orange flare to light up the lights on mirrors ? And accessory slots to the from bumpers ?

Posted: 28.05.2017, 11:45
by V8Bolle
Admin-RTA wrote:It's not a problem
We will add a part of 1 all the necessary files

Beim Mack SL V3.2 ATS war es wohl doch ein Problem.
Kein Getriebe im Teil 1!

The Mack SL V3.2 ATS was probably a problem.
No transmission in part 1!

Posted: 25.07.2017, 23:56
by FRANK_WOT
Does the air pressure an temprature gauges function properly in K200 v14.1 and ATS 1.6 ?

Posted: 07.08.2017, 17:47
by Kiwimike7
Frank_WOT the air pressure gauges partly work, I am waiting for an update from the team, because my air pressure only goes part way and therefore runs out quickly in city situations.

Posted: 13.08.2017, 17:06
by willy1962
my wish for the k200 is a possibility for lights on the bullbar.
now I`m using the lights from the K108.
that means I need Always to install both mods.

Added after 1 minute 20 seconds:
or just a seperate lightpack that can be used on all of the RTA trucks ?

Air Pressure

Posted: 19.08.2017, 10:12
by Kiwimike7
Hi I see in the latest update that the air pressure problem that I raised in April still hasn't been fixed. Any ideas when it might be?

Cheers
Mike

Posted: 30.09.2017, 00:17
by spinner
willy1962 wrote:my wish for the k200 is a possibility for lights on the bullbar.
now I`m using the lights from the K108.
that means I need Always to install both mods.


or just a seperate lightpack that can be used on all of the RTA trucks ?

I'm using this https://ets2.lt/en/hella-auxiliary-light-pack-v-2-0-by-abasstreppas/ in both ATS and ETS2 with no problems. Shown in the pic are the Hella Jumbos.
Image

Posted: 30.09.2017, 11:22
by willy1962
Thanks ,
I gonna try them.