Page 6 of 11
Posted: 06.04.2017, 03:04
by Admin-RTA
send a screenshot of what is not working
RHD will be released in version 6.1 (I can tell you, after 7-10 days the exact date )
т908 will release with 6.0.2 and 6.0.3 are in development
version 6.0.1 is ready and sent с 04.04.2017
Posted: 06.04.2017, 03:07
by AloneBacon
Admin-RTA wrote:send a screenshot of what is not working
RHD will be released in version 6.1 (I can tell you, after 7-10 days the exact date )
т908 will release with 6.0.2 and 6.0.3 are in development
version 6.0.1 is ready and sent с 04.04.2017
Not on my pc atm but the two Air gauges are not working they are just at zero when i have full air.
So 7-10 days before right hand drive comes out hmm ok
Posted: 06.04.2017, 05:54
by Bonno59
Hi,
Got the T 908 this morning, installed as per Email, but when I go to pick trailer it won't hook up, the chassis is too high and the trailer pin is too low. Any suggestions?
Posted: 06.04.2017, 06:01
by Turt
@AloneBacon, in 7-10 days Admin can tell you the exact date of RHD release. Not 7-10 days before it comes out.
Posted: 06.04.2017, 08:57
by spinner
Interesting that some of you guys are saying you need a RHD version to drive in either Europe or America , where all vehicles are LHD.
Yes , I get its an Aussie truck , but you're driving on the right side of the road. Doesn't it get confusing ?
From day one in ETS2 I drove LHD trucks , because its a simulation and I'm simulating driving in Europe and that's how it would be in real life. I have spent my entire life driving RHD in Australia but why would that carry over to driving in Europe ? That's not realistic. And yet you say it's not realistic to create a LHD Kenworth. Unless you spend the whole time driving on the left in the UK ? Surely not ?
Posted: 06.04.2017, 09:14
by FireBlade
spinner wrote:Interesting that some of you guys are saying you need a RHD version to drive in either Europe or America , where all vehicles are LHD.
Yes , I get its an Aussie truck , but you're driving on the right side of the road. Doesn't it get confusing ?
From day one in ETS2 I drove LHD trucks , because its a simulation and I'm simulating driving in Europe and that's how it would be in real life. I have spent my entire life driving RHD in Australia but why would that carry over to driving in Europe ? That's not realistic. And yet you say it's not realistic to create a LHD Kenworth. Unless you spend the whole time driving on the left in the UK ? Surely not ?
12.gif
Posted: 06.04.2017, 21:29
by v1perCL
Bonno59 wrote:Hi,
Got the T 908 this morning, installed as per Email, but when I go to pick trailer it won't hook up, the chassis is too high and the trailer pin is too low. Any suggestions?
Exctly, The chassis is too high.
Kenworth T908
Posted: 07.04.2017, 03:45
by Bonno59
Yes that's correct, but is there a fix for it?
Posted: 07.04.2017, 04:39
by Admin-RTA
correction of what?trailers?
SCS have a different scale,this problem appeared with version 1.23
Posted: 07.04.2017, 05:03
by Bonno59
I understand that but is there a fix to lower the chassis on the truck? Or is there a way around that I can pick up trailers like going in sideways ?
Posted: 07.04.2017, 05:37
by Admin-RTA
we do not change the scale of the truck,it's stupid
We have trailers in the same scale,but they are put so that it not to catch
here is an example
20170407043047_1.jpg
20170407042455_1.jpg
20170407043010_1.jpg
it only remains to turn off the progressive coupling
Posted: 07.04.2017, 05:46
by mharr304
have the double trailers been updated yet because i have the version for 1.26 and the advance coupling isn't working
Posted: 07.04.2017, 06:20
by Admin-RTA
trailers updated to 1.27 and 1.6
Added after 2 minutes 44 seconds:no wonder people enjoy
https://steamcommunity.com/sharedfiles/filedetail ... 7056608&searchtext=deleted ats
Posted: 07.04.2017, 10:18
by brodze287
for next update can you make the t908 so it gets better fps on low end computers or make two versions 1 that is high for high end computers and 1 that it lower for low end computers. that way people that have paid for this mod can actually enjoy it
Posted: 07.04.2017, 10:39
by truckjunkie
Admin-RTA wrote:we do not change the scale of the truck,it's stupid
We have trailers in the same scale,but they are put so that it not to catch
here is an example
20170407043047_1.jpg
20170407042455_1.jpg
20170407043010_1.jpg
it only remains to turn off the progressive coupling
he's not talking about rescaling the truck.
he's talking about the 5th wheel point on the trailer.
also to other people.
if you are unable to connect to a trailer, check and see if advanced coupling is enabled.
if it is, that is most likely the reasson you are unable to connect. should work if you turn it off.
Posted: 07.04.2017, 18:21
by v1perCL
truckjunkie wrote:Admin-RTA wrote:we do not change the scale of the truck,it's stupid
We have trailers in the same scale,but they are put so that it not to catch
here is an example
20170407043047_1.jpg
20170407042455_1.jpg
20170407043010_1.jpg
it only remains to turn off the progressive coupling
he's not talking about rescaling the truck.
he's talking about the 5th wheel point on the trailer.
also to other people.
if you are unable to connect to a trailer, check and see if advanced coupling is enabled.
if it is, that is most likely the reasson you are unable to connect. should work if you turn it off.
With advanses coupling turned off it works fine, but is a shame that this truck doesn't work with advansed coupling.
The western star WS4800 has no problem at all.
Added after 39 minutes 49 seconds:here a picture of the problem, chassis is too high.
Posted: 07.04.2017, 19:08
by truckjunkie
I thought the advanced coupling was dependant of each trailer.
Not truck....
Posted: 07.04.2017, 19:27
by Admin-RTA
v1perCL wrote:but is a shame that this truck doesn't work with advansed coupling.
who told you that т908 not working advanced coupling?
everything works fine
you offers us to change the scale of the truck?
or the frame under the press that under the trailers scs came?
Posted: 07.04.2017, 20:35
by v1perCL
Admin-RTA wrote:v1perCL wrote:but is a shame that this truck doesn't work with advansed coupling.
who told you that т908 not working advanced coupling?
everything works fine
you offers us to change the scale of the truck?
or the frame under the press that under the trailers scs came?
I tested myself and it doen't work. Some other people in another post says it doesn't work either.
I can record a video if you want, to show you the problem.
Posted: 07.04.2017, 20:36
by Admin-RTA
show video
Added after 26 minutes 20 seconds:https://www.youtube.com/watch?v=KKzr-SESlKQ