Yes, in the shadows forgot to add one detail. I will correct

The rest is correctly done

AMF wrote:Look a normal krone trailer, maybe this bug be on 1.28?

I'll see

AMF wrote:Maybe Wrap the hole in the shadow of the interior?

No. It's better to change the material. I will correct

Admin-RTA wrote:This is a door handle

20170806130200_1.jpg

20170806130245_1.jpg

20170806130254_1.jpg

20170806130307_1.jpg

no on this inside not the outside

?

admin look at where i circled, there is a little hole just under the window

Admin-RTA wrote:

)).jpg

yes that hole you have circles, if you look at the ground and look through the hole they are the same
if you still can't see it the zoom in on the picture and also if you look at the yello bite on the outer part of the door it is the same and plus that hole is not there in real life, look at this image there is no hole

oh my mistake, sorry for wasting your time i apologize i didn't know that is was there, i thought it was a glitch i hope didn't get you angry or anything

[Bug] The window from outside its very difficult to see ass the glass its too "Dark" and you can't see inside




And in the interior view also you can't see anything and insteand you should see like the glass



(it should be like this inside the cabin and outside of it but the glass a little bit dark)



And when you chose to dont have the window its should look like this



from interior and exterio (now the exterior it look like if you have the window)





Oh and another bug, the when your at 90km/h its show that your at 88km/h like in the photo

Admin-RTA wrote:I will check other trailers and files, there may be an error in sending files

I`m using FH16_v6.0.7 on ETS2 1:28
I`m using Skeletal_B_Double_v2.1.7
Are these the latest, because all my Skeletal trailers have that gap.

Thanks

8V92 wrote:I`m using FH16_v6.0.7 on ETS2 1:28
I`m using Skeletal_B_Double_v2.1.7
Are these the latest, because all my Skeletal trailers have that gap.

Archive name .7z
version Skeletal_B_Double_v2.1
full title Archive Skeletal_B_Double_v2.1.7z
open Archive

ATS_Skeletal_B_Double_v2.1_part1.scs
ATS_Skeletal_B_Double_v2.1_part2.scs

Added after 5 minutes 24 seconds:

LucaS wrote:Oh and another bug, the when your at 90km/h its show that your at 88km/h like in the photo

2-3 km / h is not a problem
This is the real error of the mechanical speedometer and electronic

LucaS wrote:And when you chose to dont have the window its should look like this

We did not set a goal to make such a window
We made dark glass, we were forced to make glass outside under the painting.

Hello Admin sorry for that i writte under this topic but i've sent you messages to get ATS and ETS 2 1.28 updates form my trucks and trailers but i dont have any response till yet.
Can u please answer me

Best Regards

Nesuten

Hello
Yes, we received your message last night
Oleg will be online and will send it to you

LucaS wrote:
Oh and another bug, the when your at 90km/h its show that your at 88km/h like in the photo

Hi Lucas,

did you check with the route advisor the current speed? On you right circle is the speed of the cruise control. Maybe there was a slight hill, so the current speed dropped a bit (not uncommon in highest gear)? Or did you just engage cruise control and truck is still accellerating?

Speedometer should always show same speed as RouteAdvisor. Cruise Control may differ for a short time, dependent on your conditions.

SirAeleon wrote:

LucaS wrote:
Oh and another bug, the when your at 90km/h its show that your at 88km/h like in the photo

Hi Lucas,

did you check with the route advisor the current speed? On you right circle is the speed of the cruise control. Maybe there was a slight hill, so the current speed dropped a bit (not uncommon in highest gear)? Or did you just engage cruise control and truck is still accellerating?

Speedometer should always show same speed as RouteAdvisor. Cruise Control may differ for a short time, dependent on your conditions.

nop the cruise controll is under the "cc" 0km/h that one marked is the speed that i was going ;)

Added after 1 minute 11 seconds:
i also played this game for over 1700 hours so i know what i said :P

Admin-RTA wrote:

8V92 wrote:I`m using FH16_v6.0.7 on ETS2 1:28
I`m using Skeletal_B_Double_v2.1.7
Are these the latest, because all my Skeletal trailers have that gap.

Archive name .7z
version Skeletal_B_Double_v2.1
full title Archive Skeletal_B_Double_v2.1.7z
open Archive.

I concur, my file is the same.

Soon we will go to ATS

Bonjour

J'ai aussi l'ombre assez bizarre en dessous du camion et impossible de peindre le bas du camion dans la bonne teinte. En effet la couleur change automatiquement et s'éclaircit d'elle même.

J'ai peint le camion en blanc et le bas en bleu, exactement le bleu du logo et impossible d'obtenir cette teinte voir photo

Hello

I also have the rather odd shadow below the truck and impossible to paint the bottom of the truck in the right tint. Indeed, the color changes automatically and clears up on its own.

I painted the truck in white and the bottom in blue, exactly the blue of the logo or of the trailer and impossible to obtain this hue - see photo



Added after 1 minute 5 seconds:
Thanks in advance for corrections

Hello
The color of the truck and the trailer is different due to the difference in materials
You need to change the color and make it darker than on the trailer
On the trailer you have less spec, on the truck it is more